ANALISIS STABILITAS PADA PERANCANGAN TEROWONGAN DENGAN METODE FINITE ELEMENT DI BLOK CIBITUNG PT. CIBALIUNG SUMBERDAYA KABUPATEN PANDEGLANG PROVINSI BANTEN STABILITY ANALYSIS ON DESIGNED PLANNING WITH ELEMENT METHOD UP TO CIBITUNG BLOCK PT. CIBALIUNG RESOURCE DISTRICT PANDEGLANG BANTEN PROVINCE

SUTANTI, Ambar and DWINAGARA, Barlian and ANUGRAH, Cakra (2017) ANALISIS STABILITAS PADA PERANCANGAN TEROWONGAN DENGAN METODE FINITE ELEMENT DI BLOK CIBITUNG PT. CIBALIUNG SUMBERDAYA KABUPATEN PANDEGLANG PROVINSI BANTEN STABILITY ANALYSIS ON DESIGNED PLANNING WITH ELEMENT METHOD UP TO CIBITUNG BLOCK PT. CIBALIUNG RESOURCE DISTRICT PANDEGLANG BANTEN PROVINCE. PROCEEDING SEMINAR NASIONAL GEOMEKANIKA IV (PERAN GEOMEKANIKA DALAM PEMBANGUNAN PERTAMBANGAN & INFRASTRUKTUR.

[img]
Preview
Text
No. 19 Abstrak.pdf

Download (1MB) | Preview
[img]
Preview
Text
No. 19 Prosiding Nasional II.A.1.c.b.1.pdf

Download (7MB) | Preview

Abstract

Kegiatan pertambangan bawah tanah akan selalu dihadapkan pada masalah deformasi dan kestabilan massa batuan di sekitar lubang bukaan bawah tanah yang bersangkutan dengan keselamatan kerja serta lancarnya kegiatan aktivitas penambangan. Oleh karena itu, diperlukan analisis geoteknik yang baik untuk dapat memberikan perlakukan yang tepat pada batuan yang dibongkar. Penelitian dilakukan di area Blok Cibitung PT.Cibaliung Sumberdaya Kabupaten Pandeglang Provinsi Banten yang secara geologis mengandung banyak struktur dan pelapukan yang akan menyebabkan ketidakstabilan pada batuan saat operasi penambangan. Dengan adanya permasalahan tersebut diperlukan suatu kajian geoteknik terhadap kestabilan lubang bukaan dan sistem penyangga yang digunakan. Analisis kestabilan lubang bukaan menggunakan metoden elemen hingga atau finite element method (FEM) dengan kriteria keruntuhan Mohr-Coulomb (177) untuk mengetahui faktor keamanan serta perpindahan total yang terjadi pada lubang bukaan. Karakteristik material didapat dari hasil pengujian laboratorium terhadap batuan utuh (intact rock). Secara empiric pengklasifikasian menggunakan RMR system menghasilkan nilai 38 yang termasuk dalam batuan kelas IV dengan bukaan actual 4,7 meter. Dari hasil analisis dapat disimpulkan bahwa nilai faktor keamanan secara aktual masih kurang dari 1,3 dan perpindahan total masih relatif tinggi. Sehingga harus dilakukan pemasangan penyangga yang sesuai dengan upaya peningkatan nilai faktor keamanan agar meningkatkan tingkat kestabilan lubang bukaan sehingga tidak mengganggu aktivitas penambangan. Kata kunci : faktor keamanan, lubang bukaan, total displacement Underground mining activities always face problems of deformation and stability of the rock masses surrounding the excavations, which can affect the safety and continuation activities. Therefore, a good geotechnical analysis is required to provide and appropriate treatment of the excavated of rock mass. The research was conducted in Block Cibitung area of PT. Cibaliung Sumberdaya Pendeglang Regecncy Banten Province which geologically contains many structures and weathering that will cause instability of rocks during mining operations. This problem then requires a geotechnical study of the stability of openings and the implemented support system. Stability analysis of the openings were conducted by using finite element method (FEM) with Mohr-Coulomb failure criterion (1779) to determine the safety factor and total displacement occurring in the openings. Material properties parameters were obtained from laboratory tests of intact rock. Empirical classification using RMR system produced a value of 38 which is related to class IV rock with actual opening of 4.7 meter. From the analysis results, it can be concluded that the value of safety factor is actually still less than 1.3 and total displacement is still relatively high. Therefore, the installation of support should be carried out in accordance with efforts to increase the safety factor in order to increase the stability level of the openings so it will not create a problem to mining activities. Keywords: safety factor, total displacement

Item Type: Article
Subjects: T Technology > TN Mining engineering. Metallurgy
Divisions: Faculty of Engineering, Science and Mathematics > School of Engineering Sciences
Depositing User: BARLIAN DWI NAGARA
Date Deposited: 09 Jan 2018 07:24
Last Modified: 09 Jan 2018 07:24
URI: http://eprints.upnyk.ac.id/id/eprint/14081

Actions (login required)

View Item View Item