SAPTONO, Singgih and TRILAKSONO, RAHMATYO GILANG and Siswanto, Waluyo Adi (2019) Hasil Uji Similaritas_The Influences of Normal Load Variation in Direct Shear Strength Test Parameters Tuff from Candi Ijo Yogyakarta. International Journal of Engineering & Technology.
Preview |
Text
The Influences of Normal Load Variation in Direct Shear Strength Test Parameters Tuff from Candi Ijo Yogyakarta.pdf Download (1MB) | Preview |
Abstract
This paper presents direct shear strength test results of tuff taken from Candi Ijo of Jogjakarta, Indonesia where the slopes are considered
in critical condition and need attention. Serial shear tests were conducted to find the normal loads appropriate for direct shear strength
test. The optimum set of normal loads on direct shear strength test for tuff from Candi Ijo were tried by analyzing Mohr & Coulomb
criterion against Hoek-Brown criterion. The study shows that excessive normal load may initiate crack caused by a failure on direct shear
strength test due to the generated shear stress as well as the normal stress. This can be indicated by the unacceptable high value of cohesion
(c)
and
the
low
internal
friction
angle
(ϕ).
The
maximum
limit
of
normal
stress
(σn)
on
direct
shear
strength
test
12.5%
σc
for
Indonesia
general
area
is
still
applicable
for
the
case
of
Candi Ijo. This research work recommends applying normal loads for direct shear
strength test of tuff are 0.4 kN, 0.6 kN and 0.8 kN. This recommendation was also supported by the analysis using graph suitability of
Mohr & Coulomb criterion and Hoek-Brown criterion
Item Type: | Other |
---|---|
Subjek: | T Technology > TN Mining engineering. Metallurgy |
Divisions: | x. Faculty of Engineering, Science and Mathematics > School of Engineering Sciences |
Depositing User: | Nurul Alifah Rahmawati |
Date Deposited: | 11 Nov 2021 04:11 |
Last Modified: | 11 Nov 2021 04:11 |
URI: | http://eprints.upnyk.ac.id/id/eprint/27039 |
Actions (login required)
![]() |
View Item |