TURNIP, MIKAWAN (2016) ESTIMASI SUMBERDAYA BIJIH BESI BERDASARKAN DATA GEOMAGNET DAN GEOLISTRIK (RES 2D DAN IP) SERTA TEST PIT DI DESA JANGKARASAM KEC. GANTUNG KAB. BELITUNG TIMUR BANGKA BELITUNG. Other thesis, UPN "Veteran" Yogyakarta.
Preview |
Text
ringkasan 01.pdf Download (57kB) | Preview |
Abstract
RINGKASAN
Perhitungan estimasi sumberdaya pada pada wilayah IUP PT. Amandari
Putera Nusantara ini menggunakan metode geolistrik dan geomagnet. Pengukuran
geolistrik menggunakan resistivity meter model ARES (Automatic Resistivity)
dan pengukuran geomagnet menggunakan alat magnetometer GEM SYSTEM.
Pada prinsipnya pengukuran geolistrik adalah untuk mendapatkan nilai
tahanan jenis dari batuan penyusun perlapisan bawah permukaan, sedangkan
pengukuran geomagnet adalah untuk mengetahui nilai anomali magnetik yang
timbul dari batuan penyusun lapisan bawah permukaan. Akan tetapi jika hanya
menggunakan kedua metode tersebut maka bijih besi hematit tidak dapat terdeteksi,
oleh sebab itu dilakukan penambahan dalam pengukuran geolistrik yaitu metode
Induced Polarization (IP), metode ini adalah metode untuk mengetahui keberadaan
kadar logam berdasarkan peluruhan waktu disaat arus listrik dimatikan secara
tiba- tiba. Ketiga metode tersebut untuk mengetahui keberadaan bijih besi baik
bijih besi magnetit maupun bijih besi hematit.
Setelah keberadaan bijih besi dapat diketahui, selanjutnya dilakukan
permodelan semi 3 dimensi agar dapat diketahui penyebaran bijih Besinya.
Perhitungan estimasi sumberdaya pada penelitian ini mengunakan data pemodelan
semi 3 dimensi dengan menghitung luas daerah yang diduga merupakan bijih besi.
Permodelan ini menjadi tujuan utama dari penelitian di daerah Jangkarasam,
Kecamatan Gantung, Kabupaten Belitung Timur, Provinsi Bangka Belitung., yaitu
untuk mengetahui bentuk penyebaran bijih Besi yang ada di lokasi penelitian.
Penelitian ini dapat dijadikan pedoman dalam mengadakan penelitian lebih lanjut,
yaitu spot drilling dan pengukuran geolistrik untuk area yang lebih luas
mengingat penelitian ini hanya terbatas pada 70 Ha dari 100 Ha IUP yang ada.
ABSTRACT
Measurement of resource estimate in the region of PT.Amandari Putera
Nusantara using geoelectric and geomagnetic methods. Geoelectric measurement
using a resistivity meter model of ARES (Automatic Resistivity) and geomagnetic
measurement using magnetometer GEM SYSTEM.
In principle geoelectric measurement is to get obtain resistivity values of
the constituent rock bedding under the surface, meanwhile geomagnetic
measurement is to determine the values of the magnetic anomaly arising from
subsurface rock constituent. However if only using the both methods so the
hematite iron ore can’t be detected. Therefore, the addiction of the geoelectric
measurement the method Induce Polarization (IP), this method is method to detect
the presence of metal levels based on the decay time when the electric current is
switch off suddenly. With these three methods is known the existence of magnetic
iron ore and hematite iron ore.
After the presence of iron ore detected, and than continuo to making 3
dimension model to known the spreading of iron ore. Measurement of resource
estimate in this research is followed 3 pre dimension modeling with calculate the
area that estimated are iron ore. This modeling can be the main purpose of this
research on Jangkarasam region, Gantung Sub district, Belitung District, Bangka
Belitung Province, is to knowing the shape of iron ore spreading which exist on
research location. In this case is the spot drilling and geoelectric measurements to
a larger area considering this study can only cover 70 hectares of the 100 hectares
of existing area.
Item Type: | Thesis (Other) |
---|---|
Subjek: | T Technology > TA Engineering (General). Civil engineering (General) |
Divisions: | x. Faculty of Engineering, Science and Mathematics > School of Engineering Sciences |
Depositing User: | Basir Umaryadi |
Date Deposited: | 10 May 2016 01:30 |
Last Modified: | 10 May 2016 01:30 |
URI: | http://eprints.upnyk.ac.id/id/eprint/451 |
Actions (login required)
![]() |
View Item |