NANDIWARDHANA, DAMAR (2013) MODEL NUMERIKAL RESERVOIR SISTEM PANASBUMI PADA DAERAH TOPOGRAFI RELATIF DATAR UNTUK MENCARI KONDISI NATURAL STATE DAN MENGANALISA SENSITIVITAS PANAS PADA RESERVOIR MENGGUNAKAN SOFTWARE TOUGH2. Other thesis, UPN ''VETERAN'' YOGYAKARTA.
|
Text
7. Abstract.pdf Download (15kB) | Preview |
|
|
Text
5. Daftar Isi.pdf Download (15kB) | Preview |
|
|
Text
6. Daftar Gambar.pdf Download (17kB) | Preview |
Abstract
Telah dilakukan pemodelan reservoir menggunakan software Tough2 dengan data sintetik, berupa data permeabilitas dan pororsitas. Dimana terdiri dari 4 lapisan, yaitu lapisan overburden, lapisan clay caps, lapisan recharge area + lapisan reservoir (berada pada lapisan yang sama), dan lapisan basement dengan tujuan untuk menganalisa sensitivitas panas, serta untuk mencari kondisi natural state (natural state merupakan kondisi setimbang, yaitu dimana kondisi tekanan, temperatur dan kondisi reservoirnya tidak berubah terhadap waktu). Dari hasil pemodelan reservoir oleh Tough2 didapat bahwa kondisi natural state selama 2,20857E+4 tahun, dimana terjadi penurunan suhu dari kondisi natural state tanpa sumur produksi berbanding kondisi natural state dengan sumur produksi, dimana suhu pada saat kondisi natural state tanpa sumur produksi sebesar 245OC dan suhu pada saat kondisi natural state dengan sumur produksi sebesar 235OC pada kedalaman 1350 m. Sedangkan untuk penggunaan rate 20 kg/s, 25 kg/s, 30 kg/s dan 35 kg/s untuk melihat sensitivitas heat nya, didapatkan bahwa semakin besar nilai rate yang dipakai dalam suatu sumur produksi, maka akan menurunnya nilai temperatur di sumur produksi tersebut. Kata Kunci : Natural state, Inital condition, Tough2, Reservoir Reservoir modeling has been done using the software Tough2 synthetic data, the data in the form of permeability and pororsitas. Which consists of four layers, namely overburden layer, reservoir layer + recharge area layer (located in the same layer), and basement layer in order to analyzes heat sensitivity, as well as to seek state natural conditions (natural state is a condition of equilibrium, which is where the conditions of pressure, temperature and reservoir conditions do not change with time). From the modeling results obtained from Tough2 reservoir that natural conditions state for 2.20857 E +4 years, where the temperature decreases from natural state conditions without producing wells compared with the natural state conditions of production wells, where the temperature at the time of natural state conditions without producing wells at 245OC and the temperature at which the natural state conditions of 235OC production wells at a depth of 1350 m. As for the usage rate of 20 kg/s, 25 kg/s, 30 kg/s and 35 kg/s to see its heat sensitivity, it was found that the greater the value rate used in a production well, it will decrease the value of the temperature at the production well them. Keywords: Natural state, Inital condition, Tough2, Reservoir
| Item Type: | Thesis (Other) |
|---|---|
| Subjects: | T Technology > T Technology (General) |
| Divisions: | Faculty of Engineering, Science and Mathematics > School of Geography |
| Depositing User: | Erny Azyanti |
| Date Deposited: | 24 May 2016 03:24 |
| Last Modified: | 24 May 2016 03:24 |
| URI: | http://eprints.upnyk.ac.id/id/eprint/2259 |
Actions (login required)
 |
View Item |