PENENTUAN UPSIDE POTENSIAL FORMASI TALANG AKAR BAGIAN BAWAH MENGGUNAKAN ANALISA PETROFISIKA DAN ATRIBUT SEISMIK PADA LAPANGAN “X” CEKUNGAN SUMATERA SELATAN

Wisnu Irawan, Eka (2015) PENENTUAN UPSIDE POTENSIAL FORMASI TALANG AKAR BAGIAN BAWAH MENGGUNAKAN ANALISA PETROFISIKA DAN ATRIBUT SEISMIK PADA LAPANGAN “X” CEKUNGAN SUMATERA SELATAN. Other thesis, UPN ''VETERAN'' YOGYAKARTA.

[thumbnail of 0. Abstrak.pdf]
Preview
Text
0. Abstrak.pdf

Download (27kB) | Preview

Abstract

Lapangan “X” berada di Cekungan Sumatera Selatan, Jambi dengan target
reservoar batupasir yang berada di Formasi Talang Akar bagian bawah. Penelitian
ini diawali dengan analisa petrofisika untuk mendapatkan nilai parameter
reservoar (volume shale, porositas efektif, dan saturasi air), kemudian dilanjutkan
dengan analisa RMS Amplitude. Analisa RMS Amplitude tersebut juga digunakan
dalam melakukan persebaran parameter reservoar. Analisa dalam penelitian ini
diakhiri dengan penentuan letak upside potensial yang didasarkan pada analisa
RMS Amplitude dan persebaran parameter reservoar.
Analisa petrofisika digunakan untuk mengetahui nilai-nilai parameter
litologi berdasarkan data log pada sumur CN-1 dan CN-2, sehingga pada tiap
sumur dapat diketahui nilai volume shale, porositas efektif, dan saturasi air pada
lapisan target. Selanjutnya, nilai parameter reservoar tersebut akan dilakukan
analisa nilai cut-off guna mengetahui reservoar yang prospek pada peta persebaran
parameter reservoar. Analisa RMS Amplitude akan membantu dalam menentukan
persebaran reservoar secara lateral berdasarkan anomali amplitude.
Berdasarkan analisa petrofisika pada lapisan target, sumur CN-1 memiliki
nilai volume shale sekitar 0 hingga 0,39, nilai porositas efektif sekitar 0,10 hingga
0,32, dan nilai saturasi air sekitar 0,04 hingga 0,62. Kemudian pada sumur CN-2
memiliki nilai volume shale sekitar 0 hingga 0,31, nilai porositas efektif sekitar
0,08 hingga 0,23, dan nilai saturasi air sekitar 0,18 hingga 0,67. Nilai cut-off
reservoar yang prospek memiliki volume shale 0,35, porositas efektif lebih dari
0,09, dan saturasi air kurang dari 0,63. Pada peta RMS Amplitude, reservoar yang
prospek memiliki nilai amplitude yang tinggi. Berdasarkan analisa RMS
Amplitude dan peta persebaran reservoar, upside potensial berada pada struktur
rendahan di tengah daerah penelitian dengan Inline 1409 m dan Xline 1550 m.
Kata kunci : Formasi Talang Akar bagian bawah, reservoar, volume shale,
porositas efektif, saturasi air, RMS Amplitude

The “X” field is located in South Sumatera Basin, Jambi with the
reservoar target is sandstone in Lower Talang Akar Formation. This study begins
with petrophysical analysis to get the value of reservoir parameter (volume shale,
effective porosity, and water saturation), then proceed with RMS Amplitude
analysis. The RMS Ampitude is also used to making distribution of reservoir
parameter. The analysis in this study ends with determining the upside potential
location based on RMS Amplitude analysis and the distribution of reservoir
parameter map.
Petrophysical analysis used to determine the values of litology parameter
based log data in CN-1 well and CN-2 well, so the each wells can determine the
values of volume shale, effective porosity, and water saturation on the target layer.
Furthermore, the value of reservoir parameter will be cut-off value analysis to
determine the prospect reservoir on the distribution of reservoir parameter map.
Then, the RMS Amplitude will assist in determining the lateral distribution of
reservoir based amplitude anomaly.
Based on petrophysical analysis in the target layer, the CN-1 wells have
value of volume shale from 0 to 0,39, the value of effective porosity from 0,10 to
0,32, and the value of water saturation from 0,04 to 0,62. Then, the CN-2 wells
have the value of volume shale from 0 to 0,31, the value of effective porosity from
0,08 to 0,23, and the value of water saturation from 0,18 to 0,67. The cut-off value
of prospect reservoir have the volume shale less than 0,35, the effective porosity
more than 0,09, and the water saturation less than 0,63. On the RMS Amplitude
map, the prospect reservoir have high amplitude value. Based on the RMS
Amplitude analysis and reservoir distribution map, the upside potential is located
in the lowly area of the middle study area with Inline 1409 m and Xline 1550 m.
Keyword : Lower Talang Akar Formation, reservoir, volume shale, effective
porosity, water saturation, RMS Amplitude

Item Type: Thesis (Other)
Divisions: x. Faculty of Engineering, Science and Mathematics > School of Geography
Depositing User: Erny Azyanti
Date Deposited: 23 May 2016 01:16
Last Modified: 23 May 2016 01:16
URI: http://eprints.upnyk.ac.id/id/eprint/2006

Actions (login required)

View Item View Item