ANALISA POTENSI LAPISAN BATUBARA BERDASARKAN DATA WELL LOGGING DAN UJI SAMPLE CORE DAERAH “X”, KABUPATEN TABALONG, PROVINSI KALIMANTAN SELATAN

Nugroho, Eko Pambudi (2015) ANALISA POTENSI LAPISAN BATUBARA BERDASARKAN DATA WELL LOGGING DAN UJI SAMPLE CORE DAERAH “X”, KABUPATEN TABALONG, PROVINSI KALIMANTAN SELATAN. Masters thesis, UPN "VETERAN" YOGYAKARTA.

[thumbnail of ABSTRAK.pdf]
Preview
Text
ABSTRAK.pdf

Download (453kB) | Preview

Abstract

Telah dilakukan penelitian menggunakan metode Well Logging di Kabupaten
Tabalong, Provinsi Kalimantan Selatan, yang bertujuan mengidentifikasi litologi,
menentukan karakteristik lapisan batubara, serta menentukan potensi lapisan batubara
(Seam) yang ada di daerah penelitian, berdasarkan data Well Logging dan uji kualitas
sample core.
Data yang digunakan dalam penelitian ini berupa data Well logging dalam
bentuk defleksi kurva log, hasil uji kualitas sample core dari hasil kegiatan pemboran
yang dilakukan pada 6 sumur dengan kedalaman yang bervariasi. Pengolahan data
dilakukan dengan menggunakan software interactive petrophysic, microsoft excel,
serta corel dengan output berupa penampang litologi beserta defleksi kurva log.
Berdasarkan penampang litologi, defleksi kurva log, serta uji kualitas sample
core di peroleh Pada Daerah penelitian terdapat 2 Seam potensial yaitu seam T100
pada sumur ST678, ST1151, dan GA26 sedangkan pada seam T300 terdapat di sumur
ST703C, ST1143C, dan GA52C. Pada hasil pembacaan kurva log dan hasil uji lab
Seam T100 memiliki ketebalan rata-rata 63 – 70.6 meter, Total moisture 20.4 –
24.8% , Ash Content 0.55 – 0.70% , Fixed Carbon 41.9 – 43.1%, Total Sulfure 0.09 –
0.11 , Nilai Kalori rata – rata sebesar 5973 – 6404 Kcal/kg , serta volume shale
sebesar 0.0027 – 0.0049%. Pada Seam T300 memiliki ketebalan rata-rata 20.68 – 53
meter, Total moisture 30.4 – 34% , Ash Content 1 – 1.9% , Fixed Carbon 36.3 – 38.8,
Total Sulfure 0.09 – 0.14% , Nilai Kalori rata – rata sebesar 5430 – 5911 Kcal/kg ,
serta volume shale sebesar 0.0045 – 0.0068.
Kata kunci : Well Logging, batubara, Seam potensial

The research has been carried out using Well logging method in Tabalong
District, South Kalimantan province, which aims to identify lithology, to determine
the characteristics of a coal seam, and to determine coal seams potential in the
research regions, based on Well logging data and quality data from sample cores.
The data used in this research are Well logging data in the form of deflection
curve logs and core sample quality test results from the drilling activities performed
on 6 wells with various depth. Data processing is done using interactive petrophysic
software, Microsoft Excel, and Corel to produce cross-section along the deflection
curve lithology logs.
Based on the form of a cross-sectional lithology, deflection curve logs, and
the quality of the test sample obtained at the core area of research, there are 2
potential Seams. Seam T100 at well ST678, ST1151, and GA26 whereas the T300
seam found in wells ST703C, ST1143C, and GA52C. On result’s reading of log
curves and lab tests, Seam T100 has an average thickness of 63 - 70.6 meters, Total
moisture 20.4 - 24.8%, Ash Content 0:55 - 0.70%, Fixed Carbon 41.9 - 43.1%, Total
Sulfure 0.09-0.11, average Calorific Value of 5973 - 6404 Kcal/kg, and the volume of
shale 0.0027 - 0.0049%. Seam T300 has an average thickness of 20.68 - 53 meters,
Total moisture 30.4 - 34%, Ash Content 1-1.9%, Fixed Carbon 36.3-38.8, Total
Sulfure 0.09 to 0.14%, average Calorific Value of 5430-5911 Kcal/kg, and the
volume of shale amounted to 0.0045 - 0.0068.
Keywords : Well Logging, Coal, Seam Potential

Item Type: Thesis (Masters)
Subjek: Q Science > QC Physics
Divisions: x. Faculty of Engineering, Science and Mathematics > School of Engineering Sciences
Depositing User: Bugel Suryanta
Date Deposited: 18 May 2016 03:38
Last Modified: 18 May 2016 03:38
URI: http://eprints.upnyk.ac.id/id/eprint/1365

Actions (login required)

View Item View Item